Rubrix RXMOD Rear Hub Integration for Yokomo YZ-10 Re-Releases
The updated design now supports 3mm hinge pin applications and allows seamless integration with the Rubrix RXD platform.
The RxMOD hubs are designed to accommodate either 6x10x3mm or 5x10x3mm bearings, depending on the drivetrain components being used:
- For stock YZ-10 swing shaft setups, use 5x10x3mm bearings.
- For RX4E Spring Steel CVD shaft setups, use 6x10x3mm bearings.
Product Compatibility & Rules Disclaimer: Compatible with Yokomo ’91 platforms. However, please note that these components are not approved For Yokomo '91 YZ10 builds under the UK Iconic Revival racing rules. RxMOD rear hubs are accepted in the United States and other countries, but approval may vary by region and event. Customers are responsible for verifying compliance with their local series regulations before use. Please reference RRP Aluminum Rear Hub Set for '91 YZ10 Works (RRP-135XG) for an Iconic Revival Racing Approved configuration.
Please ensure the appropriate bearing size is selected based on the specific drivetrain configuration to ensure proper fitment and performance.
Compatibility: These rear hubs are compatible with Rubrix RXD conversions, RRP RX4 Evo, RRP RX4D, Yokomo MX4, Yokomo 94-97 YZ10 and MR4BC Stock models.
Materials: Aluminum CNC machined. Blue, silver and black anodized.
Please Note: The RxMOD rear hubs are designed with a 2-degree toe-in built-in. When used with Yokomo '91 Works models, the hubs can be reversed (installed Right-on-Left and Left-on-Right) to achieve 0 degrees of toe-in at the hub.
This adjustment is required, as the Yokomo Works rear suspension arms already incorporate 3 degrees of toe-in. Installing the RxMOD hubs as labeled would result in a combined 5 degrees of toe-in per side, which is excessive for off-road racing applications and may negatively impact handling and performance.
